Cartridge Filter Housings

Complete Our Process Questionnaire for Faster Service

PENTEK® Valve in Head

Opaque Valve-In-Head Filter Housings are molded from rugged reinforced polypropylene, offer outstanding chemical compatibility, and are ideal for use in a variety of low-flow applications. These applications include under-sink and countertop residential filtration, pre- and post-reverse osmosis filtration, recreational vehicle filtration, foodservice, and humidifying systems.
Temperature Rating– 40-125°F (4.4-51.7°C)
Maximum Pressure – 125 psi (8.6 bar)

PENTEK® 3G Series

3G Standard Filter Housings are manufactured from durable polypropylene or clear Styrene-Acrylonitrile (SAN). Reinforced polypropylene housings have excellent chemical resistance and are ideal for many residential, commercial and industrial applications. Clear sumps are manufactured from Styrene-Acrylonitrile (SAN). They offer on-site examination of the cartridge and have excellent chemical compatibility.
Temperature Rating – 40-125°F (4.4-51.7°C)
Maximum Pressure – 125 psi (8.6 bar)


PENTEK® Standard Flat Cap Series

Reinforced Polypropylene Housings have excellent chemical resistance and are ideal for many residential, commercial and industrial applications. Clear sumps offer on-site examination of the cartridge.
Temperature Rating – 40-125°F (4.4-51.7°C)
Maximum Pressure – 125 psi (8.6 bar

PENTEK® Big Blue & Big Clear Filter Housings

Big Clear Filter Housings offer on-site examination of flow, performance, and cartridge life and are ideal for a variety of applications. The blue polypropylene caps are available with an optional pressure-relief button on the inlet side to relieve pressure inside the housing when changing filter cartridges. Eight models available.


FulFlo® FE Vessels

The FE Filter Vessel Series accommodates double-open-end (DOE) and single-open-end (SOE) filter cartridges in 10 in, 20 in and 30 in lengths.
Maximum design pressure is 150 psig (10.3 bar) at 450°F* (232°C) and 200 psig at 100°F (38°C) plus full vacuum.

Fulflo® FH Filter Vessels

The FH 7 and 12 cartridge filter vessels are a lightweight, economical industrial and commercial design suitable for a wide variety of filtration applications. The 100% stainless steel and bead blasted finish provides superior corrosion resistance and an excellent appearance. The hinged clamp and cover design makes cartridge change-out quick and easy.
Maximum design pressure is 150 psig (10.3 bar) at 250°F (126°C) for use in a wide range of operating conditions.


FulFlo® FHS Vessels

Fulflo® FH5 Cartridge Non-Code Filter Vessels are lightweight and provide economical filtration of liquids. A patented* safety-latch design prevents inadvertent separation of the head from the shell in the event of improper venting prior to clamp removal.
The FH5 Vessel Series accommodates either double open-end (DOE) or single open-end (SOE) filter cartridges in 10 in, 20 in and 30 in lengths.
Maximum design pressure is 100 psig (6.9 bar) at 200°F (94°C).

Fulflo® FP Filter Vessels

The FP Filter Vessel Series is designed for use with the Fulflo® Flo-Pac® 718 and 736 Pleated Filter Cartridge Series.
Maximum design pressure is 150 psi (10.3 bar) at 450°F* (232°C) and 200 psig at 100°F (38°C) plus full vacuum.


FulFlo® FPM Oil Filter Vessels

The Fulflo® FPM Vessel Series of Single Cartridge Oil Filters is designed for high efficiency and economical operation in oil reclamation and maintenance applications. The compact, lightweight design makes the FPM vessel series easy to mount on equipment and on the floor to conserve space.
The FPM Vessel Series is designed for use with the Fulflo® Flo-Pac® 718 and 736 filter cartridge series and Tru Bind 700 Series absorbent cartridges.
Vessel construction designed for 100 psi (6.9 bar) working pressure at temperatures of up to 200°F (94°C).

Fulflo® HT Filter Vessels

Fulflo HT multi-cartridge filter vessels are specifically designed for filtration of high temperature heat transfer oils and other hot fluids. All details of design, materials and construction of the HT vessel series conform to ASME code. The HT series vessels are designed for use with double open end (DOE) and single open end (SOE) cartridges in 10, 20 and 30 inch lengths.
Design: 123 PSIG at 650°F and 418 PSIG at 650°F


FulFlo® MegaFlow™

MegaFlow™ vessels are designed to accept MegaFlow™ filter cartridges that handle up to 250 gpm (950 lpm) each. They provide significant size and capital cost reduction compared with vessels containing conventional size filter cartridges. The horizontal design and coreless cartridge configuration make cartridge change fast and easy. Models are available for flow rates up to 4750 gpm (18,000 lpm).

Fulflo® MP Filter Vessels

MP Filter Vessels are ideal for a wide range of filtration applications including prefilteration of brackish, process and sea water. All MP Series vessels are built in accordance with ASME Boiler and Pressure Vessel Code, U stamp. All MP vessels have dual purpose bottom seats for use with either double-open-end or 222 O-ring design.
Flow rates from 108 gpm to 3520 gpm.
Pressure ratings from 100 psi (6.9 bars) to 150 psi (10.3 bars).


FulFlo® P Series Filter Vessels

Fulflo® P Series Multi-Cartridge Filter Vessels are designed for high flow rate where the contaminants can be effectively removed by pleated paper (surface type) media. The P Vessel Series is designed for use with the Fulflo® Flo-Pac® 718 and 736 pleated filter cartridge series. Tru Bind 700 Series absorbent cartridges also fit these vessels.
Designed and fabricated in accordance with the ASME Boiler and Pressure Vessel Code, U or UM stamp with 150 psi (10.3 bar) rating at 250°F (121°C).

Fulflo® S Filter Vessels

Fulflo® S Series Multi-Cartridge Filter Vessels meet a broad range of liquid and gas applications for flow rates up to 2,040 gpm (7,720 lpm). All details of design, materials, construction and workmanship of the S vessel series conform to ASME code.
The S Vessel Series accommodates double-open-end (DOE) or single-open-end (SOE) filter cartridges in 10 in, 20 in, 30 in and 40 in equivalents.
Available in 150 psi (10.3 bar) and 300 psi (20.7 bar) designs.


FulFlo® SF Series Filter Vessels

Fulflo® SF Multi-Cartridge Filter Vessels meet a broad range of liquid and gas applications. All details of design, materials, construction and workmanship of the SF vessel series conform to ASME code. The SF Vessel Series accommodates double-open-end (DOE) and single-open-end (SOE) cartridges in 10 in, 20 in, 30 in and 40 in equivalents.
Models available with Maximum Operating Temperature: 300 psi (20.7 bar)
With Maximum Design Temperature: 400°F (204°C)

Fulflo® WH Filter Vessels

The WH cartridge filter vessels are a lightweight, economical, Non-ASME industrial / commercial design suitable for a wide variety of filtration applications. The 100% stainless steel and bead blasted finish provides superior corrosion resistance and an excellent appearance. The swing type closure bolts and hinged cover design makes cartridge change-out quick and easy.
Maximum design pressure is 150 psig (10.3 bar) at 250°F (121° C) for use in a wide range of operating conditions.


FulFlo® B Series Filter Vessels

Carbon Steel "B" Vessels feature single center bolt for quick cartridge changing and in-line connections for easy installation. Duplex vessels permit independent or parallel shell operation. In addition, they offer the advantage of continuous service because one can be serviced while the other is operating. Manifold vessels work simultaneously in parallel shells to provide higher flow rates with less pressure drop than single-shell models.

Fulflo® BSSB & BSSR Filter Vessels

The BSSB models have a 316 stainless steel shell and a four-boss 316 stainless steel head for applications where an all-stainless steel construction is required. The BRSB vessels have a 316 stainless steel shell and feature a four-boss brass head.
Maximum operating pressure: 150 psi (10.3 bar)@200°F


FulFlo® High Pressure Filter Vessels

Ideal for HighPressure Liquid and Gas Systems for a wide range of industrial machinery and process industry applications, these vessels combine extremely high-pressure rating capability with ease of installation and rugged durability.

Fulflo® LT Series Filter Vessels

Parker Fulflo® LT Series Polymeric Vessels are an ideal economical choice for low flow industrial and potable water applications. Standard and large diameter vessels accommodate 2-1/2 and 4-1/2 inch O.D. double-open-end Fulflo® cartridges and meet FDA requirements for use with potable fluids. Both 10-in and 20-in vessels, with or without pressure relief vent, are available. Installation wrenches and brackets are optional.


FulFlo® M Series Filter Vessels

Parker’s "M" Series Single Cartridge Filter Vessels are designed for a broad range of high pressure industrial and chemical process applications. All details of design, materials, construction and workmanship comply with the ASME code for pressure vessels. The "M" series is available with and without the ASME stamp.

Fulflo® NP Series Filter Vessels

Parker’s Fulflo® NP series vessels feature pure natural polypropylene construction. The NP series is an ideal economical alternative to stainless steel and fluoropolymer vessels for filtration of corrosive fluids. They are essential for applications and processes demanding high purity filtration. Availability of 10 inch and 20 inch lengths and both single and double-open-end seal designs adds additional versatility.


FulFlo® E Series Filter Vessels

The Fulflo® E non-ASME coded cartridge filter vessels are lightweight and provide economical filtration of liquids. Housings are designed to take double open ended or single open ended filters. Housings are manufactured using 304 stainless steel with a polished exterior and rated at 100psi.

Fulflo® SSTC Series Filter Vessels

The SSTC models have a 316 stainless steel shell and a four-boss 316 stainless steel head for applications where an all-stainless steel construction is required. The vessels feature a head which accepts SOE TC style filter cartridges which eliminates the possibility of fluid bypass.
Operating pressure: 200 psi (13.8 bar)



Sign up here for notifications regarding MSC Filtration Technologies and subscribe to one of our industry specific newsletters.